POD®

POD Scat Youth Swim Goggles - Clear Lens 2 Frame Colours

0
(No reviews yet) Write a Review
$8.00

Adding to cart… The item has been added
SKU:
PDSC
Weight:
0.11 KGS
Shipping:
Calculated at Checkout

Youth Swimming Goggles SCAT by POD®

Offering Clear Lenses, Two Frame Colours, and Unique Features for Enhanced Comfort and Safety.

This model swimming goggles are designed for children of all ages.

POD SCAT Swim Goggles have manufactured PC (Polycarbonate) anti-fog UV Protection lenses.

Our goggles have flexible, soft silicone frames that allow the lenses to "float" into the frame position.

Integrated soft silicone seals provide the most comfortable seat possible around your eyes, ensuring your child's comfort during their swimming sessions. The split silicone headband will hold its position, further enhancing the comfort of the goggles.

Two Goggle Frame Colours to choose from with Clear Lenses

Aqua/Yellow Frame with Clear Lens
Pink/Purple Frame with Clear Lens

Swim Goggle Features

  • Polycarbonate anti-fog lens with UV Protection
  • Soft, flexible silicone frame and lens seals
  • Split silicone headband
  • Fixed length non-adjustable nose bridge (one-piece goggle frame)

Care Instructions

Treat the lenses with care. PC (polycarbonate) used to construct the lenses may easily scratch if rubbed with fingers or rubbed after use in saltwater.

Wash goggles in fresh water and let dry in the shade after every use.

  • Do not leave in the sun.
  • Do not leave in the car or boot on hot summer days; excessive heat may cause damage to your swimming goggles.

 

To remove any chlorine, salt, or oil buildup on your goggle lenses, it is best to use lukewarm water with a few drops of mild dishwashing detergent. Gently agitate the goggles in the solution, rinse them in fresh water and hang them out in the sun to dry.

Selecting the Correct Swim Goggles

A good method to see if a goggle suits your facial structure is to try, “The Suction Test”.

Take a pair of goggles and place against your eye sockets, without putting the headband in place. Push gently with your thumbs in the middle front section of the lens. If momentary suction is achieved, then more than likely this model will be suitable.

Be aware that not every model will fit every facial structure. If the incorrect model is chosen? Then there is a greater chance the goggles become uncomfortable and will leak when swimming.

The comfort and sensitivity of a goggle seal will vary significantly between the different materials such as Foam, PVC, TPR, Silicone or Liquid Silicone.

Adjusting Your Goggles

Depending on the model, POD Swim goggles come with various nose pieces.

  • One-piece construction, where there is no adjustment.
  • A one-piece flex construction with a flexible material frame allows the nose piece area to stretch slightly.

Headband Adjustment

A goggle headband is designed to keep the goggles in place whilst swimming and should be adjusted to a comfortable length. A tight fit is not necessarily the right fit.

If you need to over-tighten the headband, this indicates that the goggles are unsuitable for your facial structure.
The tighter you wear a headband, the more chance you will snap the headband strap.

POD has many different styles of headbands and other methods of securing them so they won't slip while swimming.

Again, familiarising yourself with the style of headband associated with the selected swim goggles will ensure that any adjustments are easily achieved.

Attention

As with anything worn close to the eyes, all care should be taken to prevent eye injuries, primarily when used by children who may not pay attention when wearing goggles. We recommend that children always be supervised when swimming and wearing goggles, ensuring their safety at all times.

Children should always be supervised when swimming and wearing goggles.

Swim goggles may cause skin irritation for some users and should not be worn by people with known susceptibility to dermatitis.

Consequently, discontinue use immediately if any irritation or inflammation occurs.

Standards

POD Swim Goggles combine functionality, innovative design and engineering using only the best raw materials, ensuring the highest quality for your child's swimming experience.

All models are treated to block Ultraviolet light from the sun and meet the following standards.

  • Australia: 1067, 1-1990. 
  • USA: ANSI Z80.3 for general purpose UV requirements and blocks at least 95% UVB & 60% UVA.
  • Conforms to British Safety Standard BS5883.

Related Products

An relatable roduct