Swimming Goggles by POD® Children Size - Available in Clear or Tinted Lenses and Two Frame Colours
These model swimming goggles have been designed for children of all ages. POD Flow Adult Swim Goggles are also available for adults.
POD Flow Swim Goggles have manufactured PC (Polycarbonate) anti-fog UV Protection lenses.
Our Swim Goggles with unique soft, flexible silicone frames allow the lenses to float into frame position.
Integrated with the soft silicone lens seals, it will provide the most comfortable seating possible around your eyes, including the split headband silicone strap that will hold its position.
Two Goggle Frame Colours to choose from with either Clear or Smoke Lenses
Silver/Blue Frame with Clear Lens
Black/Red Frame with Black Tinted Lens
Swim Goggle Features
- Polycarbonate Anti-fog UV Protection lenses
- Soft, flexible silicone frame and lens seals
- Split headband silicone strap
- Fixed length non-adjustable nose bridge (one-piece goggle frame)
Care Instructions
Treat the lenses with care. PC (polycarbonate) used to construct the lenses may easily scratch if rubbed with fingers or rubbed after use in saltwater.
Wash goggles in fresh water and let dry in the shade after every use.
- Do not leave in the sun.
- Do not leave in the car or boot on hot summer days. Excessive heat may cause damage to your swimming goggles.
To remove any chlorine, salt, or oil build up on your goggle lenses, it is best to use lukewarm water with a few drops of mild dish washing detergent. Gently agitate the goggles in the solution, rinse them in fresh water and hang them out in the sun to dry.
Selecting the Correct Swim Goggles
A suitable method to determine whether a goggle suits your facial structure is to try "The Suction Test."
To perform the 'Suction Test ', place a pair of goggles against your child's eye sockets without putting the headband in place. Gently push with your thumbs in the middle front section of the lens. If the goggles create a momentary suction, they will likely provide a good fit and seal, reducing the risk of leaks and discomfort during swimming.
Be aware that not every model will fit every facial structure. If the incorrect model is chosen, the goggles will likely become uncomfortable and leak when swimming.
The comfort and sensitivity of a goggle seal will vary significantly between different materials, such as Foam, PVC, TPR, Silicone, or Liquid Silicone.
Advice Adjusting Your Goggles
POD Swim goggles come with different shapes and nose pieces depending on the model.
- One-piece construction, where there is no adjustment.
- A one-piece flex construction with a flexible material frame allows the nose piece area to stretch slightly.
Headband Adjustment
A goggle headband is designed to keep the goggles in place whilst swimming and should be adjusted to a comfortable length. A tight fit is not necessarily the right fit.
If you need to over tighten the headband, this indicates that the goggles are unsuitable for your facial structure.
The tighter you wear a headband, the more chance you will snap the headband strap.
POD goggles have many different styles of headbands and other methods of securing them so they won't slip while swimming.
Again, familiarising yourself with the style of headband associated with the selected swim goggles will ensure that any adjustments are easily achieved.
Attention
As with anything worn close to the eyes, all care should be taken to prevent eye injuries, mainly when used by children who may not pay attention when wearing goggles.
Children should always be supervised when swimming, especially when using swim goggles. Swim goggles may cause skin irritation for some users, especially when sunburnt, and should not be worn by people with known susceptibility to dermatitis.
Consequently, discontinue use immediately if any irritation or inflammation occurs.
Standards
POD Swim Goggles: A combination of functionality, innovative design, and engineering using only the best raw materials, ensuring your child's safety and comfort.
All models are treated to block Ultraviolet light from the sun and meet the following standards.
- Australia: 1067, 1-1990.
- USA: ANSI Z80.3 for general purpose UV requirements and blocks at least 95% UVB & 60% UVA.
- Conforms to British Safety Standard BS5883.
